As an Amazon Associate I earn from qualifying purchases.
1. Eminence Legend CA154 15″ Bass Guitar Speaker, 300 Watts at 4 Ohms
- Pro sound 15″ woofer for use in bass guitar cabinets or in a PA cabinet
- A 4 ohm driver with high SPL
- Easily handles 600W and frequencies from a low 45 Hz to 3 kHz
2. Degraw DIY Speaker Kit – PAM8403 5V Amplifier + 2Pcs 4 ohm, 3 watt Speakers – Mini Class D Digital Audio Amplifier amp Board Module kit for Arduino, Includes 3.5mm Plug!
- Updated version, quality is improved! Everything you need except a power supply for adding sound to a project.
- PAM8403 – Powerful and small Class D amplifier mounted on a 28 x 20 mm breakout board. Includes a super smooth potentiometer combination volume / on-off knob. Also includes header pins.
- Mini speakers – 2 pcs. 4 ohm, 3w, 31 mm x 70 mm. The same speakers found in flatscreen TV’s and monitors.
- 3.5 mm cord – Includes 50 cm (19 in) headphone style cord and plug for easy phone or Raspberry Pi connection
- Easily power the kit with any 5V supply (not included): USB cell phone charger, 3 AA batteries, or a cell phone battery bank. Soldering required (header pins included). Do not apply power to the amplifier without speakers connected, this will result in damage to the amplifier.
3. Gravity Audio G12BD1 Single 12″ 1000W Loaded Warzone Competition Series Vented Subwoofer Enclosure Built in Amplifier 4 Ohm with High Premium Wood – 12 Inches – Universal Fit
- Single 12-inch 4 Ohm Warzone Series Loaded Subwoofer Enclosure (Ported Box)
- Peak Power: 1000 Watts | RMS Power: 500 Watts
- Subwoofer is Pre-loaded and Wired to a 4 Ohm Final Impedance Load
- Vented Design of Enclosure and Heavy Duty MDF Construction Allow for Maximum Bass
- Enclosure Air Space: 2.00 Cubic Ft | Tuned @ 38 Hz | Dim: 20 in x 17 in x 17.5 in
4. XINGYHENG 2Pcs TDA7297 Dual-Channel Audio Power Amplifier Board Module Power Input Mode 4-8 Ohms 10-50W Speakers Audio Amplifier Module Converter for DC Power Supply Audio System DIY Speakers
- Super material: It is made of electronic accessories, nickel plating on surface(anti-oxidatioan), inner conductor: pure copper. It is long lasting and durable for you to use.
- Package including: 2 pack of power amplifier board. A large area of copper and dense vias hole enhance heat dissipation. it has current limiting, short circuit and over temperature protection. Even if the output is short circuit, it will not burn out the module and it is safer
- Input power: Input power is about 4-8 Ohms, 5-15W. Working Voltage is about DC 6 ~ 18V .
- High Power High Efficiency: High reliability, strong vibration resistance, good electromechanical performance. Sound quality is very good by using this module. Mono digital audio power amplifier chip.High output and low power consumption.
- A wide range of applications: Applicable speaker impedance is 4-8 ohms (8 ohms is the best. This module can be applied to audio system, household power system, DIY speaker etc.
5. 4 Channel High Power Amplifier – Slim Stereo 4 Channel Car Audio Stereo Amplifier Amp 4Ohm
- Brand new and reliable quality 4 Channel Car Amplifier
- Can connect to 4 speakers,6 phase high frequency intermediate frequency low frequency regulation
- Double low frequency output,can be push any size Subwoofer within 160W rated power
- This 4 channel amp is also equipped with fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions.
6. Lanzar Amplifier Car Audio, 2 Channel, 1,000 Watt, 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG237) , BLACK
- AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
- INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
- POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.
7. Taramps 900890 Class D HD 3000 Watt RMS 4 Ohms Automotive Sound Systems Mono Full Range Speaker Amplifier with Built In Thermal Management Fan
- AUDIO BOOST: Automotive amplifier boost your car audio sound for during every drive
- MAXIMUM POWER: Operates at 4 ohms with 3,000-watt RMS for maximum power
- FULL RANGE: Full-range amplifier can operate on all frequencies using the right measure
- STAYS COOL: Built-in fan protects amp from overheating with 3 speeds
- VERSATILE: ideally made for most car speaker applications; Dimensions ( W x H x D): 2.56 x 9 x 7.32 inches
8. BOSS Audio Systems Elite BE1500.1 Monoblock Car Amplifier – 1500 Watts, 2 4 Ohm Stable, Class AB, Mosfet Power Supply, Great For Subwoofers
- POWER: 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss And eliminating all secondary feedback circuitry
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- SWITCHABLE BASS BOOST: Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- VARIABLE GAIN CONTROL: The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- DIMENSIONS: The BE1500. 1 is 10 inches in Depth, 7 inches in Width and 2. 3 inches in Height. It weighs 4. 5 lbs.
- : BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality
9. LyxPro 40 Watt Electric Guitar Amplifier | Combo Solid State Studio & Stage Amp with 8” 4-Ohm Speaker, Custom EQ Controls, Drive, Delay, ¼” Passive/Active/Microphone Inputs, Aux In & Headphone Jack
- HUGE SOUND FOR EVERY SETTING | Powerful 40W Combo Amp Turns Up Your Electric Guitar Like Never Before with Custom Equalization, Passive/Active Inputs, Adjustable Drive, Digital Delay & Multiple Output Options for Stage Performance, Studio Recording, Outdoor Concerts, Home Practice & Other Musical Applications
- EXPLOSIVE 8” 40-WATT SPEAKER | 4-Ohm Impedance Delivers Clear Treble, Booming Bass, Excellent Current Resistance & Reliable Frequency Response for All Kinds of Demanding Instrumentals | Master Volume Control Allows for Wide Functionality Ranging from Intimate Solo Play to Thunderous Live Concert Output
- PITCH-PERFECT EQUALIZATION | Built-In Equalizer Settings Help You Achieve Diverse Tonalities for Every Style of Play Including Boost (On/Off), Variable Distortion (Gain), Digital Delay (Time/Repeat) & Treble, Middle & Bass Adjustment (0-10) | Turn the Knobs for Clean, Clear Guitar Sound or Gritty, Blown-Out Playback in Overdrive
- 3 UNIQUE LISTENING EXPERIENCES | In Addition to the Amp’s Built-In Speaker, Enjoy a Variety of Output Options to Suit Your Exact Setup Including a ¼” Headphone Jack for Private Listening & Line Out Port for Plugging Into Larger External Speakers, PA Systems, Mixing Consoles & Other Recording Gear | Power Cable Included
- TAKE THE SHOW ON THE ROAD | Highly Capable Guitar Amplifier is Super Durable & Portable, Measuring 17” x 8.5” x 13.5” & Weighing Just 25.37 Lbs. for Travel Ease | Features an Integrated ¼” Microphone Input & Adjustable Mic Volume So Singers & Players Can Plug in Together—Great for Live Gigs, Street Performances & More
10. Pyle 6.5 Inch Mid Bass Woofer Sound Speaker System – Pro Loud Range Audio 300 Watt Peak Power w/ 4 Ohm Impedance and 60-20KHz Frequency Response for Car Component Stereo PLG64
- : AUTO SPEAKER SYSTEMS: Pyle GEARX series woofer is the latest series which have been designed and engineered for consistent and high performance The 65 inch feature an eye-catching yellow CD PP cone for plenty of stiffness without added weight
- LOW IMPEDANCE: The 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars It also make the most of every 300 watts peak power your car stereo can deliver with rubber magnet boot cover
- MID BASS WOOFER: Pyle pro mid bass woofer sound speaker system has 30 oz magnet structure and 60 Hz – 20 kHz frequency response that complete the package It helps to provide smooth, loud and detailed sound
- POWERFUL FEATURES: The specially treated rubber surround keeps your speakers secure and extending the life of the product A 1” high-temperature aluminum voice coil provides the richest sound, ensuring low distortion and providing an open sound stage
- Yellow CD P.P. Cone – Magnet Weight: 30 Oz
- Specially Treated Rubber – Impedance: 4 OHM
- Edge Suspension – Rubber Magnet Boot Cover
- 1.0” High Temperature – 300 Watts Peak Power
- Aluminum Voice Coil – Mounting Depth: 2.84″