7 Best m1a accessories [2022]

As an Amazon Associate I earn from qualifying purchases.

1. UTG New Gen 4-Point Locking Deluxe M14/M1A Scope Mount , Black

  • New Gen mil-spec quality deluxe sniper mount for M14/M1A rifles
  • Over 6-inch fully Picatinny-compatible top rail with 15 slots; accepts Weaver-style rings and allows use of iron sights
  • 1-piece machined from aircraft-grade aluminum alloy with black matte finish
  • Side plate features locking point, horizontal bottom guide and adjustable side screw to provide a rock solid foundation
  • Installs easily, no gunsmithing required; measures 6.1 by 1.6 by 1.8 inches (L x W x H)

2. Sadlak Industries M14/M1A 4pc Service Tools

  • The aluminum edition is machined from CNC from a density of ½ aircraft quality aluminum (6061), treated using heat. The material which is denser as well as huge beveled ends, offers extra comfort.
  • Extra Big Wrench For gas cylinders created abroad, we provide an edition which is extra big, just in an aluminum thickness of ½ and olive drab color.
  • Wrench Combo Apparatus for Gas Cylinder
  • Drill Set for Cleaning The drill set for cleaning consists of drill 180 dia No. 15 and .323 dia Letter ‘P’ for rubbing off carbon deposits from interior bores. The handles of the drill are machined by CN from similar kind of aluminum (6061) with an ergonomic design which is comfy.
  • Plug Cleaning Drill for Gas Cylinder (Dia .316 Letter ‘O’ Drill) Following extraction of the gas plug by utilizing Gas Cylinder Wrench from Sadlak as well as a USGI Combo tool or box wrench of 3/8, place the latest ‘O’ drill inside the gas plug to rub and extract deposits of carbon.

3. Case Club Springfield M1A Pre-Cut Waterproof Rifle Case with Accessory Box and Silica Gel to Help Prevent Gun Rust (Gen 2)

  • Pre-cut foam holds a single factory Springfield M1A Scout Squad, SOCOM 16, Standard, Loaded, National Match, Super Match, or Garand Rifle (Not meant to fit Springfield M1A CQB stock)
  • Holds up to six 10 round magazines, or three 20 round magazines & accommodates all major optics mounted either in the forward position or above the rear sight
  • Stainless steel added to padlock points for added security, Orange peel texture added to exterior finish to minimize scratches, Structural ribs added to outside of case for increased durability, Front handle length increased to help counter balance off center weighted loads, Wide bodied snap latches that can be used with gloves
  • Foam insert is (closed cell) high grade polyethylene which can be wiped clean
  • Case is Airline Approved for checked luggage, padlockable, wheeled, fully shippable & dustproof

4. TekMat M14 (M1A) Gun Cleaning Mat, Black, One Size, TEK-R36-M14

  • the soft thermoplastic fiber surface ensures your gun doesn’t get scratched
  • extra thick, 1/8” vulcanized rubber will protect your work surface and prevent the mat from sliding
  • keeps harmful chemicals, oil and dirt from penetrating down to your desk, bench or work area
  • oversized design gives you plenty of room to disassemble your handgun and to clean it without having to move parts all over
  • water-resistant, scratch proof, fade and oil resistant dye-sublimation printing
  • Sport type: Hunting

5. Case Club Springfield M1A SOCOM 16, M1A Scout Squad, Ruger 10/22, & Mini-14 Pre-Cut Waterproof Rifle Case with Silica Gel (Gen 2)

  • Heavy Duty waterproof case with pre-cut foam holds factory Springfield M1A Scout Squad or SOCOM Rifle, or a Ruger 10/22 or Ruger Mini-14 along with a Semi-Auto Pistol. Case also fits x4 10rd magazines or x2 20rd magazines & x1 pistol magazine (+1 in the pistol magwell). Built in accessory pocket will hold loose gear such as safety equipment, tools, and ammunition. Pistol cutout also includes perforations for a flashlight or laser. Stay organized, look professional & protect your gear.
  • Custom foam is closed cell & meets Mil-Spec Packaging requirements. We have included a variety of perforations to accommodate a wide range of optics (within 4″ height) along with under barrel attachments such as bipods, lasers, flashlights & foregrips. Use the included razor blade to connect the perforations so you can accommodate your unique rifle setup. If you do not need to remove a specific perforation, leave it in place and it won’t accidently tear nor will you be able to see it.
  • Case comes with a small waterproof accessory box that has a designated cutout to store small items. Also included is a reusable moisture removing silica gel canister to prevent gun rust. The canister has a built in viewing window that notifies you when saturated at which point you can recharge it by baking it in the oven. Once baked the canister will be ready for use again. This recharge process can be done indefinitely. Your climate & rifle usage will dictate how often a recharge is required.
  • Case is made to withstand hard impacts. Stainless steel added to padlock points for added security. Edge wheels allow the case to roll over smooth & rough terrain. Orange peel texture molded into the exterior finish minimizes scratches. Structural ribs added to the outside for increased durability. 3 folding handles with the front one extra wide to counterbalance off center weighted loads. Wide bodied snap latches can be used with gloves. Lid opens 180 degrees for easy access when upside down.
  • Case is shippable & is airline approved for checked luggage. O-ring gasket in the lid keeps water & dust out. Manual pressure release valve in the front allows you to equalize the atmospheric pressure when traveling to different altitudes. Case has a lifetime guarantee & exceeds Airline Transportation Association (ATA) industry standards. Legal for rifle storage in all 50 states. (Mil-Spec Packaging = (Class 1, Grad A, Type 2))

6. M1A / M14 Bipod Adapter

  • This adapter will work on any M14 or M1A rifle with wood or polymer stock
  • With this adapter you can install a “Sling Swivel Stud” on your stock so you can attach any Harris Bipod to it. works with the M1A or M14 rifles with both Wood or Polymer stocks

7. EDOG Springfield Armory M1A Rifel Schematic (Exploded View) Heavy Duty Rifle Cleaning 12”x36” Padded Gun-Work Surface Protector Mat Solvent & Oil Resistant

  • EDOG CERUS GEAR SPRINGFIELD ARMORY M1A RIFLE (EXPLODED VIEW) SCHEMATIC CLEANING MAT WITH 4 PC FIELD AND BENCH CLEANING ESSENTIALS KIT
  • 12″ x 36″ ORIGINAL EDOG CERUS PROMAT| PROTECT YOUR FIREARM AND WORK SURFACE | NON – SLIP BASE | SOLVENT & OIL RESISTANT | ROLLS UP FOR EASY STORAGE | HAND WASHABLE –
  • MAT IS SOLVENT & OIL RESISTANT | HAND WASHABLE WITH NON FADE IMPRINT | ROLLS UP FOR EASY STORAGE | SPACIOUS & LIGHTWEIGHT
  • OUR EXPLODED VIEW SCHEMATIC PROMAT ALLOWS YOU VISUALIOZE THE SOMETIMES TRICKY WORLD OF FIELD STRIPPING YOUR WEAPON. JUST CONFIDENT, SIMPLE, DIAGRAM TO HELP YOU GET THE JOB DONE
  • BE THE ENVY AT THE RANGE AND PAIR YOUR WEAPON WITH THE EXPLODED VIEW SCHEMATIC PROMAT , HAVE CONFIDENCE IN CLEANING YOUR RIFLE, LEARNING YOUR WEAPON’S DESIGN WILL BE A BREEZE. PROUDLY MADE & DESIGNED BY & FOR SHOOTERS IN THE USA

8. SADLAK M14/M1A Front Rail, Aluminum Low Profile Rail

  • Sadlak Industries M14/M1A Light Duty Aluminum Front Rail
  • Once the Front Rail is installed you have flexibility of attaching a clamp-on type Bi-Pod
  • All hardware and screws have mil-spec. Manganese Phosphate finish.

9. M1A Gas Cylinder Disassembly Wrench

  • Tough Steel Construction
  • Dark Oxide Finish
  • Rubber Base Allows For Comfortable Grip
  • Eyelet hole allows for tool hanging

10. GG&G Scout Scope Mount for M1A Picatinny Rail, Black

  • Easy installation
  • Low profile design
  • No modifications to your weapon are Required

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top