Water rushes in as the raindrops fall mercilessly. You’re left with three things- a flooded basement, ruined storage, and worst of all, no sleep. As a responsible homeowner, you know the next course of action- get a sump pump! It is the best or rather the only way to avert this problem. Out of the many variants, there’s the pedestal sump pump- for people who don’t face massive flooding.
Pedestal variations are cost-effective and suitable for lightweight water discharge. If your locality has a not-too-high-not-too-low rainfall, then right off the bat, we’d recommend getting the ECO-FLO Products EPP50– the best pedestal sump pump with premium features.
Is this product out of your budget? No worries- you can go for the Flotec FPPM3600D-01/09– an excellent pump within a reasonable price-point. Nevertheless, in this article, we’re going to have a look into the top 10 pedestal sump pumps money can buy. Along with reviews, you’ll find some useful tips and relevant information.
Table of Contents
- Best Pedestal Sump Pump Reviews
- Buyer’s Guide
- Final Verdict
Best Pedestal Sump Pump Reviews
After long deliberation, we present the list of our favorite pumps with a detailed breakdown.
When it comes to long-lasting quality, no pumps can outrun the WaterAce WA50CPED. You will be amazed to see how well this pump moves out water from your basement, even if your basement faces frequent floods. So, we consider it to be the best-rated pedestal sump pump among all.
At a Glance
- 115 Volts
- 5000 GPH maximum
- Cast-iron construction
- Automatic float switch
- Stainless-steel column
This equipment can sit on any kind of concrete block without any trouble. So, you can handle the installation effortlessly. Its durability is unquestionable because of the cast iron construction of the pump, and the rugged design.
The column pipes are constructed with stainless steel (non-corrosive material). So, you don’t need to worry about facing any sorts of corrosion. The WaterAce WA50CPED pump comes with a motor of 115volt power and is 3/8inch solid. A built-in overload circuit gives protection to the engine motor. This feature is highly valuable to some homeowners. The 1-1/2inch PNFT discharge surely makes this pump very suitable for your base. It can suck up 5000 gallons of water per hour in your basement with a 0-feet discharge lift.
There is also an automatic switch that float at the top of the device with a wide adjusting range. The power cord is more than 90inch long, making the pump suitable for deep well water too. The noise-free operation and smooth performance make this pump very user-friendly.
The Superior pump 92551 is a top-rated pedestal pump that comes with rugged cast iron and stainless-steel construction design. With this excellent pump, you can sleep at night without worrying about your basement. It is effortless to install due to its simple design. Even a newbie can set this machine within 3 hours. So, if your house faces only occasional flooding, this superior pedestal sump pump gives you quite an advantage.
At a Glance
- Cast-iron construction
- 2700 GPH
- Stainless-steel impeller
- Double O-ring seals
On top of that, the stainless-steel impeller and cast iron base are sure to last for a long time. If we look at the performance, the Superior pump 92551 has a 2700 gallons per hour of maximum flow rate with a water head of 10feet. This discharge rate is quite average for a pedestal sump pump.
However, if you don’t face frequent floods, then there is no need for you to worry about this issue. And besides, this pump is very energy efficient that draws only 3.06 amps.The solid copper winding inside the motor and double O-ring seals ensure optimum quality. The stainless-steel automatic switch comes with a metal switch arm to increase durability and strength. And with the 10-feet long power cord, you can set this pump according to your need.
If you want a pedestal sump pump on which you can rely on without any doubt, even when a storm breaks out, then ECO-FLO EPP50 has to be the perfect choice for you. When you pay for this beast, you are buying confidence along with it.
This product is a CSA-approved heavy-duty pump that delivers at 0.5 horsepower. It has a powerful motor of 115volt capacitor that allows it to operate very efficiently. The pump weighs approximately 14.79 pounds. An adjustable vertical float switch is mounted at the top of the device that allows the pump to start automatically if height of the water reaches a certain level, and it stops after the level drops. So, if you buy this product, you can sleep at night without worrying about any flood damage to your basement.
The EPP50 is capable of moving 5000 gallons of water per hour. That is quite impressive. It has a non-clogging vortex impeller, which makes it capable of pumping out solids in the water through a pipe of 3/16inch diameter. Its low noise performance is very relaxing.If your house faces frequent floods, you can have full confidence in this pump. You are sure to appreciate the outstanding power and efficiency of this product.
The Flotec FPPM3600D is an amazing model with a pedetal design, allowing a user-friendly and quick installation. It is one of the top quality pedestal sump pump available in the market.This pump has a discharge rate of 2460 GPH for a 10ft water head.
But when the height disadvantage is not present, this machine can pump out 3480 gallons of water every hour. This discharge rate is extraordinary for a 1/3 HP pedestal pump. That is why it is the best one out there. The cast-iron design is very rugged to make sure the installation is easy. The external housing is non-corrosive because of the thermoplastic resin. The pump weighs only 11.3 pounds, making it one of the lightest pumps out there. It has a temperature rating between 35F to 77F.
The pump comes with a top inlet debris screen, finely meshed, to prevent clogging from rubbles. At the top of the float shaft, a switch lever, made of metal, is mounted to increase the reliability of the sump pump. You can adjust the on-off cycle arrangement very quickly with this switch. It has a 6ft long power cord and requires 115 to 120VAC GFCI outlet to operate. To increase your safety, it comes with a three-prong plug that prevents excessive current from flowing through the circuit. The built-in thermal sensor protects the 3.5A motor from an overload of power. For running this machine at its maximum efficiency, you need a sump diameter of 12inch.
If you are looking for a sump pump that stays in your budget and also exceeds your expectations, the ECO-FLO EPP33 model would be our recommendation. Even though it is cheaper than the other pedestal pumps, this machine will not stop to amaze you with its outstanding performance.
Most of the sump pumps are made of cast iron, but the EPP33 has a thermoplastic (non-corrosive material) robust design. You might be thinking this machine can’t stand up to your expectations. But we can assure you that this fantastic piece of device is capable of giving excellent performance with enough durability. The 1/3 HP motor has a maximum capacity of 3000 GPH, which is enough to deal with average-sized basement floods.
It is also capable of lifting water up to 20 feet vertically. So, if you have this pump, you won’t need anything else. The adjustable switch works automatically concerning the water level in the basement. The 115volt motor has protection of thermal, and you will find a power cord of 10inch. It is an excellent choice to handle 3/8inches solids.Overall, this item is a perfect solution for people who are having budget problems.
The WaterAce WA33PPED another pump is a budget sump pump that comes with a lightweight construction design. As we all know, the WaterAce brand is very well known for its long-lasting quality, and the WA33PPED is no different.
The base and the column both have thermoplastic construction. So, you can remain stress-free when it comes to rust formation. It weighs only 12.9 pounds. This lightweight design allows you to install the pump without any trouble. This pump has a 115volt capacitor motor, capable of providing a power of 1/3 HP. This powerful motor can transfer 3480 gallons of water an hour from your basement. This rate is enough to keep an average-sized residential basement dry as a bone.
The WaterAce WA33PPED pump delivers clean water as it can filter any solids larger than 3/8inches. As a result of its 1-1/2inch FNT discharge, the pump allows the volume of water to increase, which ensures a fast and smooth flow of water.And last but not least, there is an adjustable switch that operates automatically. It is mounted at the top to keep it dry during operation. It enables an on/off arrangement of the pumping process concerning a safe water level inside the basement.When it comes to the rate of water flow and head performance, the Waterace products always beat its competitors. In this case, that saying remains the same.
½ HP sump pump is trendy right now. You can find many different models of pumps of this power in the market. But if you want to buy the best ½ HP pedestal sump pump, then ECO-FLO EPC50 should be the go-to option to consider. This pump ensures the optimum flow of water and exceeds its competitors when it comes to head performance.
It can move a tremendous amount of water an hour, roughly 5000 gallons. For an average-sized basement, this discharge rate is more than enough. The EPC50 sump pump has a motor of 115V power and placed at the top to ensure it stays dry all the time. A thermal sensor is present to protect the motor from overheating. The base is made of cast iron, and a steel column (plated with zinc) is attached to it.
The thermoplastic impeller allows it to filter any solids larger than 3/8inches. It also has a float switch for automatic start of the pump when needed. Because of the long power cord, you can place the pump anywhere you want without the need of an external cord. This CSA approved pump is highly durable and remarkably energy effective. You are sure to appreciate this beautiful machine for its noise-free operation and efficient performance.
Now, let’s look into the things one should be mindful of before investing in a pedestal sump pump.
1. Frequency of use
The equation is simple.If your house faces frequent floods, then you should choose a heavy-duty sump pump for your basement. But if not, then you can buy a light-duty pump that comes at an affordable price.
2. Construction material
The housing material should be your next major concern. It must be reliable and durable. Stainless steel is a great choice, but it is a little expensive. On the other hand, fiberglass-reinforced thermoplastic provides enough durability, and it is cost-efficient.
Each sump pump has a different amount of maximum lift height. The product you choose should be able to handle the depth of your basement.
4. Motor horsepower
The horsepower indicates how fast the pump can transfer water. For handling occasional flooding, a 1/3 Horsepower rating is sufficient. But if your basement faces frequent flooding, then a ½ Horsepower motor is preferable.
5. Noise level
If your sump pump makes a huge sound when it operates, then you’ll always be in fear of an explosion (imagine a huge pump sound). It can wake you up at night all of a sudden if flooding occurs. So, check the noise level of the engine before you buy it.
6. Power source
For people who have access to continuous electricity, an electrically powered sump pump is perfect. But for rural areas, water-powered models are more suitable.
7. Flow rate
A sump pump with a high flow rate can send out an enormous amount of water in a short period. So, it reduces the risk of flood damage to your basement. Your flow rate choice should depend on the volume of water your basement has to take.
8. Switch type
There are three types of switches: vertical float, electronic and tethered float. For residential houses, the vertical one is much more preferable as it doesn’t get damaged by water pressure.
9. Motor capacity
The motor capacity refers to the amount of water a pump can move out. If yours has a low pumping capacity, you might face severe damage to your basement structure during massive floods.
For a proper installation, make sure that the model you buy goes perfectly with the size and condition of your basement. Furthermore, you can set up the pump without any assistance if it has a simple installation system.
If your pump is out of commission and needs repair, it can cost you a fortune. Trying to bag a warranty while buying your product is always a win-win situation. So, we recommend you hop on the warranty wagon, if possible.
12. Thermal protection
Protection fo thermal is essential for a heavy-duty sump pumps. It saves the motor from an overload of power or any other dangerous overheating conditions that can cause pump failure.
Can water pedestal sump pump be used as a primary pumping system?
Water-powered pedestal pumps should be a secondary option, a backup of sorts. These pumps solely rely on the water from your plumbing fixture to operate. As such, for consistent and reliable water evacuation, water-powered pumps are unsuitable. Their best use is as a battery backup pump, not primary.
What are the problems that come with a pedestal sump pump?
In the case of massive flooding, this sump pump doesn’t have enough juice to transfer a vast volume of water. Besides, this machine is slower, and it needs a permanent space on the basement floor for installation.
We get it- a sump pump is a considerable investment. So, everyone wants to have a pump that’ll last and deliver for years to come. Due to such high expectations, it’s rather challenging to put your finger on one pump. No fear- we’ve covered all there is to know about top models. You can rest easy and choose the best pedestal sump pump after reading through our reviews. Our personal recommendation would be the ECO-FLO EPC50 for its outstanding durability and power. If you’re looking for a cheaper alternative, there are several options on our list, feel free to browse through.
We hope that our review can help you buy the perfect one that meets all your needs, ciao!