7 Best Solid Color Deck Stain [2022]

As an Amazon Associate I earn from qualifying purchases.

Table of Contents

100% Acrylic formula with advanced adhesion technology allows finish to be applied to hard to coat surfaces
Early 12 hour rain resistance
Cold weather technology allows application down to 35 degree

Enhanced waterproofing protection to help make sure your wood is protected from cracking due to water
Advanced sunblock uv defense helps protects your wood from dangerous uv rays that can wear d the coating
Provides a mildew resistant coating to help prevent stains and discoloring
Weather-ready application allows you to stain when you want, not when the weather dictates, providing the same excellent results in less time

Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
Acts as Both a Stain and Sealer for Your Wood – Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
Low Odor Stain, Water-Based Cleanup – Low VOCs (<60 g/L)
For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

PROTECTS AGAINST COLOR FADE AND PREVENTS GRAYING – #1 Deck Protects Wood From Damage Caused By Exposure to the Elements. Can Be Used On Pressure Treated Pine, Cedar, Fir, Redwood, or Most Other Softwoods. Hardwoods Will Require More Frequent Maintenance Coats.
BOTH A DECK STAIN & DECK SEALANT IN ONE – #1 Deck Stain Is a Dual-Purpose Stain & Sealer. It Adds Color to Your Wood and Seals it, Preventing Damage Caused by Water Penetration.
ALLOWS THE WOOD GRAIN TO SHOW THROUGH – Available in 5 Beautiful, Semi-Transparent Deck Stain Colors That Dry to Flat, Natural Looking Finishes That Will Enhance the Beauty of Your Exterior Wood.
BETTER FOR THE PLANET, EASY SOAP & WATER CLEANUP – With Less Than 50 g/L VOC Content, #1 Deck Sealer Is a Better Choice For Our Planet. Clean Up is Super Easy – Just Use Soap and Water.
WORKS ON DAMP WOOD, MINIMIZING THE WAIT TIME BETWEEN CLEANING AND STAINING – Once Your Wood Deck Is Visibly Dry, It’s Ready to Stain.

Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
May be applied using sprayer, roller or brush onto the woods surface.
Requires no back brushing and will nerver leave runs, laps, or streaks.
Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
Requires no diluting or thinning prior to spray applications.
Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
Easy maintenance – no sanding or stripping required for re-application
“Goof Proof” application
No laps, runs or streaks
No back brushing
Apply in any temperature
Subject to or will include a PaintCare recycling fee in the following states: CA, OR, CT, VT

7 Best solid color deck stain [2022]