Being the local lawn-lord is by no means a trifling task. It takes a lot of seasonal expertise and lawn care knowledge to get the lustrous, thick green grass every homeowner wants. One of the must-have items you need in your armory before you embark on your quest is a sprinkler system.
A sprinkler system offers you a budget-friendly way to water your lawn effectively. And to power your sprinkler system, you need the best sprinkler pump. These devices ensure a steady flow of water with a consistent pressure to feed your entire system. With units like Wayne WLS150 at the helm, watering the lawn has never been easier. It has all the premium feature a lawn-owner would want in a sprinkler pump.
In this article, you can find a complete review of our top picks for the best sprinkler pumps that you can buy at a reasonable price.
Table of Contents
- Most Recommended Sprinkler Pumps
- Best Sprinkler Pump Reviews
- 1. WAYNE PLS100 Portable Lawn Sprinkling Pump
- 2. Flotec FP5172 Sprinkler Pump
- 3. Wayne WLS150 Cast Iron
- 4. Red Lion RLSP-150
- 5. 1.6 HP Booster Lawn Water Pump
- 6. Red Lion RLSP-200 Self-Priming
- 7. GOULDS GT15 IRRI-Gator Single Phase Centrifugal Pump
- 8. Simer 3415P Sprinkler System Pump
- 9. Homdox 1.6HP Stainless Shallow Well Sprinkling Pump
- 10. ARKSEN 1200W Stainless Shallow Well Water Booster Pump
- How to Choose the Best Sprinkler Pumps?
- Final Thoughts
Most Recommended Sprinkler Pumps
Best Sprinkler Pump Reviews
We ran the numbers, did the research, and finally present to you the list of all the top-tier sprinkler pumps available.
1. WAYNE PLS100 Portable Lawn Sprinkling Pump
The Wayne PLS100 is a lightweight pump with a unique portable design. It is very suitable for light-duty watering jobs.
This model has a charming stainless-steel design that results in a very durable frame. As we all know, stainless steel is highly resistant to corrosion and stains. So, you don’t have to worry about longevity when you buy it.
The pump weighs only 20.6 pounds. So, you can easily transport it anywhere. For making the carrying more comfortable, there is a built-in handle. It also comes with a dedicated on/off switch that allows you to use this device easily. The included cooling fan enables you to run the engine continuously.
With the 1 HP, 120-volt motor, you can lift water at a maximum height of 20-feet. It also offers a maximum flow rate of 850 GPH and can maintain pressure up to 60 pounds per square inch. You can also attach a garden hose as long as 200-feet with this machine.
The Wayne PLS100 is the best portable sprinkler pump available in the market. It offers a remarkable flow rate and decent water pressure, making it an excellent option for domestic use. Besides from all these features the company gives one year warranty.
2. Flotec FP5172 Sprinkler Pump
When it comes to long-lasting performance, the Flotec FP5172 beats all other sprinkler pumps. This little piece of beauty weighs only 41.5 pounds, and it is the best water pump for sprinkler system.
The pump has a very robust and heavy-duty construction. The fiber-glass reinforced thermoplastic material not only makes it resistant to corrosion but also highly durable. It is capable of handling water with a maximum temperature of 60 °C (140°F).
Because of the dual voltage system, the motor can operate with either 230-volt or 115-volt electric outlet. It can work with a large irrigation system up to 30 sprinkler heads. This machine has a powerful motor of 1.5 HP that provides a maximum flow rate of 67 gallons of water per minute and a maximum discharge lift of 25-feet.
The Flotec FP5172 has a self-priming design. It permits de-watering and water transfer under a maximum pressure of 47 pounds per square inch. There is also an automatic sprinkler system that reduces the workload for you. It also protects against any overheating issues. It comes with 1 year warranty.
3. Wayne WLS150 Cast Iron
Wayne is a world-class brand that produces first-rated sprinkling pumps. The Wayne WLS150 is a remarkable machine, and it is, undoubtedly, the best lawn sprinkler pump available.
- Cast Iron Construction
- 240/120 volt
- 2950 GPH (5-feet-vertical)
- Thermoplastic infuser and impeller
This model features a cast iron housing construction. So, the durability is outstanding. The cast iron material tends to get hot, but it is above the burn-up range of the pump itself. The reinforced thermoplastic design of the infuser and impeller provides high resistance to corrosion. So, you don’t need to worry about its long-lasting quality.
Even though the motor requires a 240-volt electric outlet to operate, there is a dual voltage system that allows you to run this device with a 120-volt electric power also. But there is a minor downside. The wiring is quite complicated, and it may take you a lot of time to install it properly if you don’t have much knowledge about electric circuits.
The most significant feature of this machine is its ability to transfer a vast volume of water. This 1.5 HP pump can move out 2950 gallons of water at 5 feet and 2500 gallons of water at 15 feet every hour at 30 pounds per square inch. And for ensuring this massive flow rate, there is a 2-inch NPT suction with a 1.5-inch NPT discharge hose. This model offers one year of warranty.
4. Red Lion RLSP-150
If you want to buy a sprinkler pump that stays within your budget and also gives a decent performance, then the Red Lion RLSP-150 should be right up your alley.
This pump has a powerful motor of 1-1/2 HP. It can lift 71 gallons of water per minute at the height of 5-feet when the discharge pressure is 10 pounds per square inch. For a 1.5 HP pump, this is a fantastic flow rate.
You can get the water from a distance of 150 feet because of the 2-inch NPT suction hose and 1.5inch discharge hose. It can also handle a maximum working pressure of 47 pounds per square inch.
Due to the cast iron construction, the pump ensures long-lasting build quality. The construction is very rugged and robust. It weighs approximately 62 pounds. As it has a self-priming design, you have to fill the body with water only once. The manufacture gives you 2 years warranty.
Thermoplastic material is used for the impeller and the diffuser. So, the components are highly resistant to rust and overheating. And last but not least, this model has a dual voltage system that allows it to run with either a 230-volt electric power or 115-volt electric power.
5. 1.6 HP Booster Lawn Water Pump
The 1.6 HP shallow well sump pump is a perfect option for those who prefer energy-saving products. This model is sure to amaze you by exceeding all of your expectations.
This powerful piece of machinery can handle any draining job because of its decent flow rate of 700 GPH. With the 1.6 HP motor, it is capable of drawing water up to 23-feet. And besides, the capability of withstanding 66 pounds per square inch water pressure makes this machine suitable for water transport and irrigation.
The pump has a unique construction. Cast iron is used to build the whole body except the front part. The front section has a stainless-steel design. This combination gives the body a long-lasting quality and resistance to rust.
For making transportation easier, there is a comfortable handle. The pump weighs only 17.75 pounds. So, it is one of the most lightweight pumps in the market. A waterproof on/off switch is included to ensure your safety.
The self-priming design of this pump allows the use of an automatic sprinkler system, de-watering, and water transfer. The 115-volt motor also features a cooling fan, allowing the machine to run continuously for a long period.
6. Red Lion RLSP-200 Self-Priming
If you are looking for a sprinkler pump with outstanding power, then the Red Lion RLSP-200 is the right choice for you. It is capable of transferring a massive amount of water that makes it perfectly suitable for large yards.
This beast can move out 89 gallons of water per minute and has a maximum working pressure of 47 pounds per square inch. Furthermore, the 2-inch NPT suction and 1.5-inch NPT discharge allow this machine to increase the volume of water and provide a smooth flow. The impeller and the diffuser have a high-efficiency thermoplastic design. This design not only makes them corrosion resistant but also very durable.
Cast iron is used for the construction of the base and the housing. Cast iron is a very durable material. However, it tends to get hot. So, you should let the pump cool after using it for some hours to avoid any kind of leaks or overheating issues.
The Red Lion RLSP-200 comes with a 2 HP motor that is compatible with two different voltages: 115-volt and 230-volt. So, you don’t need any voltage converter for setting up this device.
7. GOULDS GT15 IRRI-Gator Single Phase Centrifugal Pump
The GOULDS Pumps GT15 is an incredible centrifugal pump that offers excellent performance and premium build quality. The installation is so simple that you will need no assistance to set it up even if you are a newbie.
As it has a cast iron housing, the durability is unquestionable. It can work under a maximum pressure of 125-PSIG and withstand a maximum water temperature of 140°F. There is also a stainless wear ring in the diffuser that ensures extended performance in harsh conditions.
The bolt down diffuser and the impeller have positive alignment with each other. On top of that, the glass filled Noryl impeller is resistant to corrosion and abrasion. For additional corrosion resistance, both inside and out have an electro-coat paint.
The 1.5 HP motor runs at 3500 RPM and provides a maximum flow rate of 110 GPM at a 5-feet discharge lift. It requires a 230volt power source to operate. The pump also has a self-priming design. So, when the water level reaches the suction pipe’s end, it reprises automatically.
The GOULDS Pumps GT15 comes with a back-pullout design. Because of this, you can easily disassemble it for repair without disturbing any piping. For casing drain and vacuum gauge, there are tapped openings. The seals are designed with 300 series stainless steel components that prevent it from running dry. Apart from all features the manufacturer company offers 5 year warranty.
8. Simer 3415P Sprinkler System Pump
When it comes to reliable performance, the Simer 3415P outruns all other sprinkler pumps. It comes with a charming look that catches your eyes very quickly.
This machine has a maximum flow rate of 67 GPM. For a 1.5 HP engine, this rating is quite impressive. Not only that, but it can also lift water from a depth of 20-feet.
The housing of this model is made from thermoplastic material. It is very durable, as well as corrosion-resistant. The pump can withstand high water temperatures up to 140-degree Fahrenheit.
The Simer 3415P pump weighs approximately 33.2 pounds and has a size of 19.4 x 11.5 x 13.8 inches. It is a standard size, and you don’t need to sacrifice much space for installing this little piece of beauty.
This pump is a corded-electric tool, and it requires a 230-volt power source. However, it comes with a dual voltage feature. So, you don’t need to buy an external voltage converter if you have a 115-volt electric outlet.
9. Homdox 1.6HP Stainless Shallow Well Sprinkling Pump
The Homdox 1.6 HP is a fantastic shallow well pump that comes with so many extra features. The flexibility of this model is outstanding.
The pump can tackle any draining job without hassle because of its incredible flow rate of 700 GPH. The 1.6 HP motor offers a maximum suction head of 23-feet.
With the durable stainless-steel head and aluminum housing design, this bad boy can give you a long-lasting service. It also provides high resistance to rust. The machine can endure water pressure of 66-psi or less, making it perfect for irrigation and water transport.
This portable pump weighs only 17.45 pounds and has an iron handle so you can carry it easily. There is a waterproof on/off switch, which is safe to use. You can use this machine as a well pump because it is compatible with a tank. You can also use it as a booster pump with a pressure regulator.
The Homdox 1.6 HP offers extraordinary performance. You can use it for gardening, sprinkling systems, deep & shallow wells, large aquariums, agriculture settings, and also for transferring water from pools, rain barrels & tanks.
10. ARKSEN 1200W Stainless Shallow Well Water Booster Pump
The Arksen 1200W is an exceptional shallow well pump with stainless steel construction. This beautiful machine comes with an affordable price and impressive performance
It has a self-priming design. You need to fill its body with water only once after the installation. The body has a protective paint all over it. So, the metal parts are not exposed to air; therefore, they resist corrosion.
The 1.5 HP motor has thermal overload protection to prevent any overheating issues. The engine is powerful enough to transfer 925 gallons of water per hour, and it has a lift rating of 150 feet.
Moreover, the pump doesn’t need any maintenance, and you don’t have to oil it regularly. So, it can save a lot of your time and money.
The Arksen 1200W is a lightweight pump that weighs only 18 pounds. However, its 150-foot head lift can provide more than enough pressure and water for tackling any draining job in a short period. It can handle water pressure up to 63 psi, making it suitable for irrigation.
How to Choose the Best Sprinkler Pumps?
When buying the best sprinkler pumps for yourself, there are certain factors that you should consider. You need to think critically and make informed decisions to ensure the device you choose is the right one for you.
To that end, here are a few things you should consider when buying a sprinkler pump.
Size of the sprinkler pump
Before investing in a sprinkler pump, you need to consider your size requirements. You need to consider your pressure requirements, which are measured using gallons per minute and pounds per square inch.
With too small of a pump, you will not be able to fulfill your requirements. On the other hand, if the pump is too large, you might blow out the sprinkler system. Make sure you do not exceed the maximum limit of your system.
Location for Sprinkler Pump
Where you place the pump is also an important yet often overlooked factor to consider when buying a pump. Not all units can handle the same distance. For some pumps, the distance between the water source and the sprinkler system needs to be minimal. Consider your specific condition before buying your pump.
Pumping height refers to the lift amount that you need to move the water from the source to the pump. In most cases, a sprinkler pump cannot handle more than 5 feet of lift.
It is wise to measure the amount of lift you need. You should find the value in the product specification of the pump. Thankfully, some pumps can lift up to 25 feet, but you might need to spend a little extra to get your hands on them.
Your pressure requirements depend on how far the water needs to travel to reach the sprinkler head. The size of the discharge pipe also dictates how much water pressure you need in your pump.
To measure your pressure requirements, you need to measure the distance between your pump and the furthest sprinkler head. If the distance is around 100 feet, you need a1.5 inches discharge pipe to ensure adequate water pressure.
Sprinkler pumps mostly run on electricity with a dual voltage rating of 115 or 230 volts. However, for larger units of 2.5 or more horsepower engines, you need 230 volt or 3 phase sources to supply enough power to it.
You can also find models that use gas generators or solar energy for fuel. These units are more suited to rural areas where electricity is not readily available. The pump that you choose must match your power situations.
The water level available at the source dictates the type of sprinkler pump you need for your system. For instance, if you are drawing water from a well, your best option would be to go for a submersible sprinkler pump.
In most home conditions, you should be able to get by with a centrifugal pump. Turbine pumps are also a great option if you are drawing water from a river or pool.
No matter what product you buy, you want it to be durable. The construction quality is an important determining factor in the overall durability of a sprinkler pump. However, that is not the only one.
Additional features such as a metal guard can protect the unit from sun and rain. You should also try to keep your pump away from a high saline environment as it can cut down the lifespan of the unit drastically.
As we already mentioned, the construction materials play a vital role in extending your units’ durability. Ideally, you want to avoid devices that are made of plastic, as it will not be able to protect the internal components of the pump.
Casings made of materials such as cast-iron, stainless steel, or fiberglass are the best choices if you want a well-made sprinkler pump. They not only protect your unit from the impact but also prevents rust or any other form of moisture damage.
The flow rate is essentially the capacity of the pump. In other words, it determines how much water can travel through the pump at a time. Its unit of measurement is Gallons per minute or GPM for short.
Now depending on your sprinkler system, your required flow rate will vary. You need to match your requirement with the flow rate listed in the spec sheet of the product. That way, you can be sure that water can flow evenly throughout the system.
Finding the best sprinkler pump for your system may seem tricky, especially if you do not know where to start. But with our handy guide, you should have a decent head-start on the subject.
For those who want nothing but the best, the Wayne WLS150 1.5 HP pump is the clear winner. It is a premium product with all the great qualities you expect from your pump.
The WAYNE PLS100 1 HP is also a decent choice if you are on a budget. Sure, you will be sacrificing a bit on the engine power, but you still get all the great features of the brand.
We wish you happy shopping!