In the era of our great-great elders, the only way to extract water from the underground was by dropping a bucket and pulling water out manually. This was time-consuming and troublesome since the wells would be challenging to move when the area ran out of water. Pulling water out by yourself meant a waste of both time and energy. But nowadays, with the advancement in technology in this fast-paced generation, convenience is right at your doorstep.
The creation of the submersible well pump allows easy access to groundwater, even as deep as 90 ft. Finding the best submersible well pump out of the many products can be a bit muddling, so in this article, we will review some of the good ones as well as provide information regarding submersible pumps.
Looking for a quick recommendation? Right off the bat, we’d say our suggestion for premium quality seekers is the Hallmark Industries MA0343X-4. As a budget-friendly alternative, you can try the Red Lion 14942402.
Table of Contents
- Best submersible well pump reviews
- 1. Hallmark Industries MA0343X-4 (best quality submersible well pump)
- 2. Red Lion 14942402 (best 1.5 hp submersible well pump)
- 3. Hallmark Industries MA0419X-12A
- 4. Hallmark Industries MA0414X-7
- 5. Hallmark Industries MA0414X-7A (best submersible pump for domestic use)
- 6. Hallmark Industries MA0343X-4A (best 1 hp submersible well pump)
- 7. Red Lion 14942409 RL22G10-3W2V (best 1 hp 220-volt submersible well pump)
- 8. Happybuy 3 HP 220V (best 12-volt submersible well pump)
- 9. Red Lion 14942405
- 10. SCHRAIBERPUMP 4″ Deep Well Submersible Pump
- HOW TO CHOOSE THE SUBMERSIBLE WELL PUMP
- How far down should I put the submersible pump in the well?
- What is sleeving a submersible well pump?
- How many years does a well pump last?
- What Happens If the Area Where the Pump Is Installed Runs Out of Water?
- What Sort of Lubrication Should Be Used in Submersible Well Pumps?
- What Is the Best Way to Clean My Well pump?
- Final Verdict
Best submersible well pump reviews
We present a detailed breakdown of all our chosen pumps. All the information you need about these products is here at your disposal.
1. Hallmark Industries MA0343X-4 (best quality submersible well pump)
Our next contender is also from the Hallmark industries. It is a stainless steel deep well submersible pump with 33 GPM water movement and a 150 ft. Head. It is ideal for a 5 inch or slightly larger wells, and you can use the pump for decades without any maintenance or repair.
The stainless-steel material is resistant to rust and corrosion; thus, it will serve you well. With its 1HP power, it can work in even some of the bigger wells. This well pump needs 115v (a bit higher due to better motor performance) to operate.
Moreover, the MA0343X model pumps water into an open tank instead of a pressure tank. It comes with a 2-wire pump that includes a built-in control box, which means you don’t need to have an external control box for your device.
It also has an additional ground wire that comes in handy as it provides safety to the surrounding area and the people, reducing the chances of accidental electrocuting.
The pump features a built-in thermal switch that optimizes the safety of this device. This thermal switch stops the pump from overheating. The highly powered motor also has a built-in check valve to ensure efficiency.
Furthermore, the pump motor is hermetically sealed, which is excellent because less energy is required to operate it, and this, in turn, helps control the electricity bills.
2. Red Lion 14942402 (best 1.5 hp submersible well pump)
Our first choice is a submersible well pump by Red Lion, famous for its robust construction. Made of high-quality stainless steel, this pump has the ability to flow water to up to four-bedroom houses.If you’re looking for a consistent freshwater supply, then this submersible pump is the go-to option.
For instance, the pump can supply water to cabins, farms, and rural homes that contain 4 inches or higher drilled wells that have a depth measurement of 250′.
The device is powered by 2- or 3- wire motors that have become a standard in the industry. It has a flow rate of 12 gallons per minute.
The stainless-steel material contains a control case on the models that have three wire pumps. Moreover, this model features a thermoplastic discharge and a motor bracket.
What the stainless-steel pump does is keeps the motor safe from any external damage, and its internal damage is prevented by a suction screen that stops debris from being sucked inside.
Furthermore, it has an in-built check valve, which stops the occurrence of backflow. The 2-wire motor can be situated deep inside the well, so it is suitable for wells that have a depth of 100 ft.
The MA0419X-12A Submersible Pump by Hallmark Industries is an affordable device that is made of high-quality stainless steel. It comes with a 12HP power, which makes it ideal for industrial use. Thanks to its unique construction and design, it comes with more extended durability and efficiency. The stainless-steel material is resistant to corrosion, so it is suitable for underwater use.
Along with its two-wire pump, it has another wire, namely the ground wire that keeps the surrounding area safe. Also, it allows people to handle the pump safely without accidental electrocution.
The water temperature that flows out of the pump ranges from thirty-two to one hundred and thirteen degrees Fahrenheit. It also has a built-in control box so you can efficiently operate the device.
Moreover, the pump has a maximum flow of 35 GPM, which is great because it can provide a constant stream of water in the household. It features a thermal control which is built-in and promotes durability.
The device also includes a capacitor start and a seal in the motor. These features ensure that the pump does not produce any loud noise while it works with the flow of water.
This is another innovative deep well submersible pump from Hallmark Industries. It has an excellent build quality, made of stainless steel material. Thus, the pump is resistant to rust and corrosion.Although it has been built for domestic use, the pump is also ideal for industrial use because of its heavy-duty design.
The 1HP motor can pump 33 gallons of water per minute, so it is easily able to transfer water to the household. Moreover, the pump has a two-wire pump as well as a separate wire. The separate wire is called the ground wire, which is used for safety and prevention of accidental electrocution.
This pump is powered by a regular 110V power-source and features a built-in thermal device that guarantees improved protection and durability. It is suitable for deep wells that are 5 inches or more in diameter.
Furthermore, the pump comes with a built-in check valve, which ensures a silent and smooth operation. You won’t be disturbed by any excessive noise while the pump flows out water.
The motor inside the pump is hermetically sealed to protect it from malfunction and damage that might result from overheating. Additionally, you’ll be free from any electricity-related stress, as the seal ensures lesser power consumption.
5. Hallmark Industries MA0414X-7A (best submersible pump for domestic use)
The Hallmark Industries are well-renowned in designing well pumps with the needs of a deep well owner into consideration, and the MA0414X submersible pump is one such product.This device is operated by a 60HZ 230V 1HP motor, which gives the submersible pump its extraordinary capability. Its performance is equivalent to that of a 2HP pump.
The pump is made of stainless steel material and is suitable for domestic as well as industrial use. It has a 2-wire pump that includes a built-in control box, so you don’t need an external one to handle the pump. It also features a built-in capacitor start and is hermetically sealed, which reduces overheating and decreases the amount of energy needed to operate the device. The equipment can pump thirty gallons of water per minute.
Even though it has a plastic bottom suction, this pump is known to have higher durability than others. The pump operates smoothly and silently so you won’t be disturbed as it flows water to your household. It comes with a built-in check valve, intake screen and diffusers, and robust thermoplastic impellers. The well pump is pretty easy to install as it also includes an instruction manual through which you can follow the steps correctly.
6. Hallmark Industries MA0343X-4A (best 1 hp submersible well pump)
Another winner from the Hallmark Industries is the MA0343X-4A deep well submersible pump. This pump is highly efficient and reliable. Made of stainless steel material and cast-iron structure, the pump promotes long durability with maximum output.
The well pump is ideal for small properties that have small water reservoirs. With 1HP, it has more than enough power to pump water to your household. Moreover, the pump can flow out 33 gallons of water per minute. This device runs on 110V and 60HZ, and it also has a less power consumption rate than other models. It comes with a 10 inches electric cord. The pump also has a ground wire with its 2-wire pump. This ground wire provides safety to the surrounding area and its people as it lessens the chances of accidental electrocuting.
The motor is hermetically sealed and has built-in thermal protection to prevent it from overheating. This feature also causes the engine to consume less energy, so you do not need to worry about huge electricity bills. Furthermore, the pump includes heavy-duty impellers that provide maximum performance and optimal efficiency. The pump is resistant to rust and corrosion and has a built-in control box, so you don’t have to add an external one.
7. Red Lion 14942409 RL22G10-3W2V (best 1 hp 220-volt submersible well pump)
This deep submersible well pump from Red Lion is powered by 2- or 3-wire motors and is ideal for larger wells that are 4 inches or more in diameter. It is also the perfect device to pump fresh water to several different applications.
For instance, it can supply water to cabins, farms, and rural homes that have deep drilled wells to the depth of 250 inches. It has a franklin electric motor and rubber bearings that come with extra-large surfaces to provide maximum stability. Other than stability, it also allows water to flow from different channels while keeping sand particles away from the surfaces. Generally, debris like small particles and sand are known to clog submersible pumps, and this is why the pump includes a built-in check valve that prevents backflow.
Moreover, its suction screen and thermoplastic discharge feature prevents the pump from clogging or malfunctioning. The pump is made of durable stainless steel material. It has a built-in control box, so you don’t need an external one, and a ground wire to provide safety to the surrounding area and people. The steel material is resistant to rust and corrosion so that it will last you for a long time.
8. Happybuy 3 HP 220V (best 12-volt submersible well pump)
The Happybuy 3 HP 220V submersible well pump is made of a robust stainless-steel body that can provide an excellent flow rate, up to 630ft deep under the surface.
This well pump has a flow rate of 43 gallons per minute, and the 25 heavy-duty impellers are capable of providing stable and efficient performance. The outlets and inlets of the pump are made of sturdy cast iron, so they will not wear out in a hurry. Whether you need it for domestic use or commercial use, the pump is fully equipped to serve in both conditions. Moreover, the device will be able to pump out water, whether it is 16.4ft or 630ft below the ground.
But if you have water available on the surface, then all you have to do is mount this well pump horizontally. The pump comes with a built-in check valve made of stainless steel that ensures complete protection from rust and corrosion. Moreover, the pump includes diffusers, thermoplastic impellers that give the pump excellent protection from overheating. The aforementioned features cause low energy consumption, so you don’t need to worry about huge electricity bills. The pump is suitable for extracting water from reservoirs, canals, rivers, etc.
Here, we come back to another well pump model from Red Lion. This pump is highly efficient and designed especially for deep wells. It can be used in deep wells that are 4 inches in diameter or bigger wells that have a depth of 100ft.
The well pump is powered by a standard 3-wire franklin motor. Its 0.5 HP 230V motor is quite competent and powerful, and it can deliver 12 gallons of water per minute. This pump comes with a sturdy rubber bearing that has extra-wide surfaces, which ensures excellent shaft stability. Moreover, its numerous flow channels keep debris, such as sand particles away from the bearing surfaces.
The well pump includes a ¼ inch of NPT thermoplastic head, which provides optimal performance as well as keeps the device free from rust and corrosion. With this pump, you don’t have to get an external control box as it has a built-in control box with a 3-wire pump. It also has a ground wire to provide additional safety to the surrounding and its people. This device is suitable for domestic use. The motor comes with thermal protection, which keeps it safe from overheating and also lessens energy consumption. You also get a wiring kit and an instruction manual with the pump to achieve a hassle-free installation.
The deep well submersible pump from SCHRAIBERPUMP is a sturdy device used for 4″ well casings and larger. This machine is ideal for freshwater supply to farms, cabins, and rural homes that consist of a 4 inch or deeper diameter wells.
The well pump is known for its excellent efficiency as it can channel water to your household without any hassle. This device will keep you well supplied with water for many years. The motor of this pump is thermally protected and has a maximum of 95 degrees Fahrenheit work temperature to prevent overheating while it pumps out water. This is a 2-wire pump with an additional ground wire that provides optimal safety to the adjacent area. Also, everyone operating it or being nearby will remain safe from accidental electrocuting. Energy consumption is also considerably lower.
The stainless-steel casing is rust and corrosion-proof, so the material will last for years to come. It comes with an easy to read the instruction manual, which makes the whole installation process effortless. The patented impellers on this pump have a unique design that provides faster flow and a high head for better performance and more extended durability. It has a built-in check valve that prevents water from flowing back to the device and causing the impellers to backspin.
HOW TO CHOOSE THE SUBMERSIBLE WELL PUMP
Before you decide to buy a submersible well pump for your household, there are some things you need to be aware of. Factors like the size of the pump, voltage, horsepower, etc. are a handful of aspects you need to ponder upon before choosing the right one for you. Now that we have seen some of the submersibles well pump reviews, in the following guide, we will discuss the different types of pumps and their qualities.
In layman’s terms, the discharge rate tells us how much water the machine can pump per hour or minute. This rate is used to verify the power level of the well pump. Your power level choice should depend upon how you’re going to use the pump (commercial or domestic) and where you’ve to place it (5, 10, or 15-feet under).
For instance, if you want a well pump for a deep well, then you need one that has a flow rate of 20 to 30 GPM discharge rate.
This is one of the most important factors to consider: whether the pump includes a float switch feature or not. Usually, wells in mountainous or dry areas are known to refill themselves, so the water supply in the well is generally in good shape and won’t run out anytime soon. However, if you feel that the water level might decrease in one night or the next few days, then you need to buy a pump that has a float switch. What this feature does is prevents the device from pumping when there is no water around it.
If the water level reduces and the pump is still running, it might cause significant damage to the equipment. So, the float switch will cause the pump to turn off when the level of water is low automatically.
Size of The Pump
When it comes to submersible well pumps, the water ends, and motors come in different sizes. Usually, the engines are measured concerning their horsepower, and the water ends are measured in gallons per minute. The water movement capacity is directly proportional to the number of impellers. So, if there are a higher number of impellers, then the pump will be able to channel out more water.
So, you need to know how the combination of water ends and the pairing of motors work to pump out the water. There are also some other aspects such as well depth, size of the well tank, water level, etc.
One of the reasons submersible pumps is so popular because they are built to provide maximum durability. When you look for the best well pump, you need to consider how long the device can stay inside the well before you have to maintain it.
So, we suggest that you choose a pump that utilizes plastic components and cast iron because these won’t corrode or rust in a hurry. Despite the inclusion of robust materials, maintenance goes a long way. So, our recommendation is to check the submersible pump regularly to prolong its durability.
Wire Vs. 3-Wire
By now, you must be aware that submersible pumps can either be found with either a 2-wire or 3-wire design. However, there are some fundamental differences between them. The 2-wire well pumps have their relay and start capacitor within the device while they are submerged within the well. On the other hand, the 3-wire well pumps have their relay and start capacitor inside a basement or the control box. So, even when the submersible pump is placed inside the pump, you have easy access to the capacitor and relay.
· Benefits of a 2-Wire Pump
In terms of efficiency, 2-wire pumps are said to be more reliable and robust. Moreover, the wire and the pump are inexpensive. However, if the pump’s capacitor starts to malfunction, then the entire device has to be replaced. Also, the 2-wire pumps have a limited horsepower of 1.5 HP.
· Benefits of a 3-Wire Pump
In the case of a 3-wire pump, if the start capacitor gets damaged, then you only have to replace the control box of the submersible pump. However, there is a slight chance that the pump itself might malfunction after the control box falls apart.
A well is an excavation hole or shaft that is mostly used for extracting water from below the surface. The width of the well is determined by how much water it has or is needed for use. It also depends on the size and power of the pump. Generally, the domestic wells range from 4 to 6 inches, and they are suitable for pumps that have a flow rate of 10 GPM to 60 GPM.
The submersible pumps for households are usually designed with 0.5 HP, 1HP, or ¾ HP options. Generally, the more depth a well has, the harder the pump has to operate to extract the groundwater from the subsurface. So, the higher the horsepower, the greater will be the water flow rate in greater depths.
The standard voltage of a submersible well pump is 230V. Most of the pumps are incorporated with the regular voltage because anything less than 230V could be considered hazardous.
How far down should I put the submersible pump in the well?
Usually, most of the submersible well pumps have to have a depth of 5 inches off of the bottom of a well. If the well consists of a sand bottom, then you have to set the submersible pump 15 inches to 20 inches off the bottom to prevent the sand from entering inside the pump.
What is sleeving a submersible well pump?
Sleeving is a process where you place the pump inside a 4″ diameter PVC pipe, which is a little bit longer than the length of the pump. Next, you attach 4 inches well seal on the top of the PVC pipe. By doing this, the water enters naturally in the pump from bottom to top, passing the motor and cooling it in the process.
How many years does a well pump last?
The average life of a submersible well pump ranges from 10 to 15 years. Still, it mostly depends on factors such as the quality of the motor, the number of cycles, and the concentrates of debris or sediments in the water.
What Happens If the Area Where the Pump Is Installed Runs Out of Water?
If the submersible pump is unable to extract any water, the best solution is to switch it off and place it in another location that has a water source. When the area has no water, the pump will work twice as hard to get water, and this will cause it to overheat. As a result, the motor might break down or malfunction.
What Sort of Lubrication Should Be Used in Submersible Well Pumps?
The type of lubrication that you need to use depends on what the specific product requires. So, you have to check the instruction manual that you receive with your device.
What Is the Best Way to Clean My Well pump?
There is a simple way to clean the submersible well pump. First, you need to turn off the unit and bring the device up to the surface. Second, you have to find the water inlet and clean it to get rid of the debris like moss, sand, etc. Then you can return the inlet and the pump to its place and test the device to see if it’s working correctly.
Submersible well pumps can make water extraction much easier, and these products do last for a considerable time! However, get the wrong one, and you’ll lose within a few months, resulting in anxiety and frustration. In our quest to find the best submersible well pump, we’ve thoroughly researched and examined products, looking into the nitty-gritty details.
According to us, the clear winner of our submersible well pump roundup is the Hallmark Industries MA0343X-4. Our other recommendation would be the Red Lion 14942402 for its affordable price and its ability to pump from wells that are 250ft deep.
We wish you a happy shopping!
As an Amazon Associate I earn from qualifying purchases.For more information, check ourAmazon Affiliate Disclosure page.
Hey there bud,
James A. Porter here, a veteran plumber, coming to you from New Orleans, Louisiana.
As I grew up in one of the most rain-infested areas of the USA, I had to pick up a thing or two about plumbing. While most people stop after picking up a few plumbing tricks, I began my career in plumbing.
Please click here to read the full bio.