As an Amazon Associate I earn from qualifying purchases.
Table of Contents
1. MOSTPLUS Quad Fold Soft Truck Bed Tonneau Cover On Top Compatible for 2015-2022 Ford F150 F-150 Bed Fourth Fold Styleside (5.5 FT Feet Bed)
- Truck bed Compatible for: 2015-2022 Ford F-150,Only for Styleside 5.5′ Feet Bed (67,1 inch)
- Easy Installation, all required harness are included. No Drilling and Further modification. Installation manual included. 1 Pcs of Stick Touch Lamp Included
- High Quality with 3 Mounting Point: Quad Fold Truck bed is made by double sided tear-resistant vinyl with 3 heavy duty aluminum powder coated frames. It has 4 horizontal crossbars to avoid air lifting issue.
- Waterproof & UV resistant: This tonneau cover can be washed with soap and water, Keeps your equipment inside your bed dry.
- Safety Guarantee with US Patent Clamp, Please measure your truck bed length and make sure you have the correct model before ordering!
2. Kikito Professional FRP Hard Tri-Fold Truck Bed Tonneau Cover for 2015-2021 F150 5.5ft (67.1in) Bed
- Fitment:2015-2021 F-150 (5.5’/67.1″; NOT For Models With Factory Utility Track Sys. & Roll Bar) – PLEASE VERIFY YOUR BED LENGTH BEFORE ORDERING
- Professional FRP panels and internal honeycomb structure support,Resist the impact of heavy objects,Protect your cargo from the elements & theft.
- waterproof, snow proof and dirt proof, Keeps Truck Bed Dry and Secure.
- Easy install, No drilling need. Simply fold from front and back, then lift up and off to gain full use of truck bed. Lightweight design permits easy removal and reinstall.
- The US patent design of the hinge caps and snap-on seal makes the cover more waterproof and durable.(Provide 3 years warranty)
3. Gator EFX Hard Tri-Fold Truck Bed Tonneau Cover | GC24029 | Fits 2021 Ford F-150 5′ 7″ Bed (67.1″)
- Fits Ford F150 5′ 7 Bed (67.1″)”
- TOUGH TRUCK BED PROTECTION – The Gator EFX Hard Tri-Fold is constructed of heavy-duty aluminum panels that automatically lock when closed, providing a level of security only found in hard folding tonneau covers. Panels are coated with a scratch-resistant, UV-protective, black powder coat finish.
- EASY INSTALL & LOW-PROFILE DESIGN – The EFX tonneau cover can easily be installed in less than 30 minutes, without the use of tools or need for drilling. The truck bed cover mounts to the inside of the truck bed rails allowing the cover to sit flush with your truck bed, providing a stylish low-profile look.
- WEATHER PROTECTION – This hard folding truck bed cover comes equipped with an integrated water management system to keep the rain, snow, dirt and dust out of your truck bed. Perimeter rubber seals and inner drain tubes carry water away from and out of the bed, providing superior protection from the elements.
- 3-YEAR WARRANTY – The Gator EFX Hard Folding cover is backed by a 3-year warranty, and supported by our US-based customer service team. If anything goes wrong with your cover, our tonneau cover experts are at your service and ready to help!
4. Gator ETX Soft Roll Up Truck Bed Tonneau Cover | 53315 | Fits 2015 – 2020 Ford F-150 5′ 7″ Bed (67.1”)
- Fits 2015 – 2020 Ford F-150 5′ 7″ Bed (67.1″)
- MADE IN THE USA | made in the USA with globally sourced materials and supported by our USA-based customer service team!
- FAST & EASY INSTALL | Simply clamp the rails on without the use of a drill. Cover assembly comes with everything you need for a simple install
- 100% TRUCK BED ACCESS | Roll the cover towards the cab and secure with the storage strap for full access to your bed
- LIMITED LIFETIME WARRANTY | The Gator ETX Soft Roll Up is backed by a Lifetime Warranty on the frame and a 10-year warranty on the tarp
5. BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448329 | Fits 2015 – 2020 Ford F-150 5′ 7″ Bed (67.1″)
- Fits 2015-2018 Ford F-150 Short Bed (5’6″)
- This hard folding tonneau cover easily clamps on with no drilling and provides outstanding security against rain, snow, theft, dirt and sun
- Built with aircraft grade aluminum sandwich panels
- Relatively light, yet offers heavy duty durability
6. Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2015-2022 Ford F-150 | Styleside 5.5′ Bed (66″) | TG-BC1F9029
- Cover appears a little short : Make sure side rails are positioned properly, not too far from the tailgate, Move the whole cover assembly towards the tailgate, while making sure it’s properly sealed at the front. Some species truck models have lower front bed rail. Apply front seal strip provided to the front bed rail to seal the gap
- Comes with dual coated 24oz marine grade vinyl top, heavy duty aluminum powder coated side rails and clamps. Built-in horizontal crossbars offer support when cover is lying flat and roll up with the cover providing full bed access.
- Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Also comes with adjustable tension system on the end of the side rails to keep the cover tight and wrinkle free.
- Easy No-Drilling installation with the provided instruction and hardware. (Small holes will need to be cut for vehicle equipped with Over-the-Bedrail bedliner to secure the clamps; Works with Under-the-Bedrail bedliner without modification.)
- TYGER Limited Lifetime warranty! (Please measure your truck bed size before ordering. We accept returns, however customer will assume the return shipping cost if ordered wrong.)
7. Xcover Low Profile Hard Folding Truck Bed Tonneau Cover, Compatible with 2015-2022 F150 Pickup 5.6 Ft Styleside Bed
- Fitment: Fit 2015-2022 F150 Pickup, 5.6ft Styleside Bed. Xcover is Low Profile and sit inside of truck bed, full stake pockets available to be used with the cover on.
- Well Protect Your Cargos: Xcover Low profile Hard Tri-fold tonnneau cover is designed to perform in the most extreme conditions,premium UV resistant and cold resistant, no matter snowy, rainy, windy or sunny, your cargos on the bed will be well protected from moisture and dirt.
- Unique Clamping System & Theft Protection: Patent pending rail and latch design, Xcover latch allows for one-finger release to open and locks automatically when you close the cover. Hard Panel is scratch resistant and provides maximum theft protection.
- Durable & Easy Installation: Solid Core Hard Panels can be rated up to 500lbs of evenly distributed weight. Please see the video on the left for installation , it is completely assembled for easy No-Drilling installation in minutes. ATTENTION: Make sure the Flat Washer and Spring Washer are all placed on bolt before screw the plastic nut on. TIGHTEN ALL BOLTS & NUTS BEFORE DRIVING!
- 5 Years Warranty: Against defects in materials and workmanship under its intended use, Please be assured to use our tonneau cover. Any bolts or mounting hardware need the replacement, any questions, please contact our customer service. WARNING: Always make sure the clamps and bolts are tightened before driving, never drive with a cover in partially opened position.
8. DNA Motoring TTC-RU-001 Soft Vinyl Roll-Up Tonneau Cover Compatible with 04-14 F150 5.5Ft Fleetside Bed
- FITMENT: DNA MOTORING Vinyl Soft Top Roll-up Tonneau Cover Compatible with 04-14 Ford F150. This Upgrade Unit Perfect Fit with 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 with 5.5 – 5.6 Feet Fleetside Bed.
- PLUG & PLAY: Easy to Install With Included Clamps. Adjustable Tension for the Perfect Fit. No Need to Cut or Drill into the Truck Bed, the Preassembled Unit Making the Installation Easier than Ever. Note: Vehicles with a bedliner installed may require modifications to install this product.
- INCREASE SPEED & SAVE GAS: Increases Trucks Aerodynamics at Speed. Gas Saving Benefit from a Covered Bed. Rubber Weather Seals Help Well Protected the Entire Bed.Elastic Straps to Secure Cover in Stored Position.
- DURABLE MATERIAL: Velcro edges to Seal Against Truck Bed, Ultra-light Weight (Less than 30lbs) but Strong and Durable. Extra Coating to Help Prevent Scratches for Superior Protection.
- GREAT EXPERIENCE: Model-Specific Designs, Test-Fitted to Ensure Perfect Coverage of the Whole Bed, along with Accurate Measurement for Sewing and Anti-Curl Corner to Guarantee Show-Level Appearance in All Weather.
9. Tyger Auto T1 Soft Roll Up Truck Bed Tonneau Cover Compatible with 2009-2014 Ford F-150 | Styleside 5.5′ Bed (66″) | TG-BC1F9022 , Black
- US Design Patented
- Cover is dual-coated and made out of heavy duty 24oz. marine-grade vinyl, with built-in horizontal crossbars that offer support when cover is lying flat; and roll up with the tarp to provide full bed access when in need. Also comes with aircraft-grade aluminum side rails, and stainless steel clamps for mounting to the truck bed.
- Seals with Velcro strip on the sides and secures with latch lock system at the tailgate. Tension system is available and can be adjusted on the end of the side rails to keep the cover tight and vinyl wrinkle-free in any weather conditions.
- Easy no drilling installation with instruction and mounting hardware provided. | NOTE: Small holes will need to be cut in the bedliner for vehicles equipped with over-the-bedrail bedliner to secure the clamps for proper cover installation; cover will work with under-the-bedrail bedliner without modification.
- LIMITED LIFETIME ! | IMPORTANT: Please measure your truck bed size before ordering. We accept returns; however customer will assume the return shipping cost if ordered wrong.
10. Gator Covers ETX Soft Roll Up Truck Bed Tonneau Cover | 53307 | Fits 2004 – 2014 Ford F-150 6′ 7″ Bed (78.8”),6′ 5″ Bed
- Fits 2004 – 2014 Ford F-150 6′ 7″ Bed (78.8″)
- MADE IN THE USA | made in the USA with globally sourced materials and supported by our USA-based customer service team!
- FAST & EASY INSTALL | Simply clamp the rails on without the use of a drill. Cover assembly comes with everything you need for a simple install
- 100% TRUCK BED ACCESS | Roll the cover towards the cab and secure with the storage strap for full access to your bed
- LIMITED LIFETIME WARRANTY | The Gator ETX Soft Roll Up is backed by a Lifetime Warranty on the frame and a 10-year warranty on the tarp