As an Amazon Associate I earn from qualifying purchases.
Efficiency, cost, and power are the three most important things that come to our mind before we consider a submersible pump best or perhaps perfect. So, it is tricky to find a brand that can successfully combine these three features. Well, who better than one of the leaders in the sump pump industry?
Yes, we’re talking about a household name when it comes to pumps- WAYNE. In this article, we’re going to present the Wayne CDU980E review, a top-tier pump from a top-tier company. This product is assembled in the USA, including the local and foreign components that ensure the best build quality.
- 3/4 HP motor that discharges 4600 GPH water
- An automated highly responsive vertical float switch
- Durable construction with both cast iron and stainless steel
- Signature suction design prevents clogging
- The handle is a bit short for portability.
- Requires power cord in larger space
Table of Contents
Buying Guide
There are some essential things enlisted below to let you know whether the sump pump is suitable for you or not.
Requires extended power cords
It is common knowledge that power cords are beneficial to prevent short circuits. So, most pump owners prefer having the longer one as we feel safekeeping the power supply as far away from the ground as possible. However, this unit comes with an 8 ft long power cord, which is well-suited for small, medium, and large-sized basements. This one can efficiently reach a moderate distance, so undoubtedly no issue regarding safety, but some customers showed disappointment with the length of the cord. Thus, the wise decision would be buying a sump pump with extended cords at least more than eight ft in case of huge pools or underground areas.
- INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry.
- TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
- EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!
- ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use.
- QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance.
Last update on 2023-03-09 / Affiliate links / Images from Amazon Product Advertising API
Features & Benefits
Thermal Insulation
Thermal insulation is one of the best features of a sump pump, which is very important considering the extended lifespan of the motor. So, this product includes the thermal insulating body to ensure high performance from the engine.It helps to prevent the unwanted rise of heat by dissipating it continuously through the water.
Thus, the outer body tries to manage the temperature by itself even before the cooling component starts working.
Vertical Switch
It is not always possible to keep track of the pump from time to time for discharging water. So, you expect an automated system to get rid of continuous monitoring in your basement. This unit offers a vertical float switch, which is tested to one million cycles to ensure longevity. It comes with polypropylene that is solid enough to endure any type of water leakage.
It detects the water level and turns on automatically. The sump pump starts removing water when the level rises to 9 inches in height. Again, the motor shuts off when the water level drops at 4 inches. Moreover, there is a floating guard to protect the vertical switch. It keeps all the debris and waste at the pit-side for better flow.
Portability
This sump pump comes with a unique dimension that makes portability quick and effortless. It is a compact and lightweight product where the height, width, and depth are 8 inches, 8 inches, and 12 inches, respectively. Besides, there is also a handle so you can hold it while moving it from one place to another. However, according to our observation, the handle is a bit small, which makes lifting it a little challenging.
Switch Guard
Switch guard is another essential component of a sump pump that helps to increase the durability of a pump even after extended hours of underwater operation. It prevents cartage damage, which assures no harm while moving the device from one place to another.
Durability
Durable construction is the first and the most requirement of customers, and Wayne indeed gives their hundred percent to make sure the best build quality in all of their products. This one comes with the combination of robust cast iron and stainless steel construction that lasts year after year without any issue. The motor housing is also stainless steel coated; thus, resistant against rust.
Even though there is no epoxy coating over the paint, it still does not cause any leakage or outflow.
Flow Rate
Everyone demands a higher flow rate as it is significant to keep the basement free from flooding. This product comes with a 3/4 HP motor that efficiently pumps out 4600 gallons of water per hour. The maximum discharge rate is applicable at 0 ft height, and it changes accordingly in different heights of water level.
Handle
Although this sump pump is lightweight, it includes a stainless-steel handle to make portability easier. If we consider the size of the pump, the handle might seem comparatively small, which might be an issue for some people.
Power (Water Per Hour)
None of us can deny the importance of a powerful motor, as it is another reasonable concern. Keeping up to the standard power issues, the CDU980E includes a 3/4 HP motor with a discharge rate of 4600 GPH. The maximum discharge rate of this sump pump is 4600 gallons per hour at 0ft height water level. However, you may find a slight change over the flow rate, especially when your discharge height goes up. Besides, the flow rate reaches 3600 gallons per hour at 10ft discharge height.
It drops a bit more at 15ft and 20 ft, where the discharge rate becomes 2550 and 1100 gallons per hour, respectively. So, if you have decided to put this sump pump in your bucket list, then you can say goodbye to a damp basement right now.
Power Cord
This product offers an 8ft long power cord, so if your power supply is within range, then you don’t need to bother about it. But, if the connection is far away from the basement or pool, then you have to use another extension cord.
Cooling System
Wayne comes with a powerful 3/4 HP motor that requires a power supply of 120V and 60Hz. It means the engine will heat up after running for quite a long time. Therefore, this product includes a unique cooling system that balances the temperature quite well. The thermal overload protection works behind the scene, where it shuts off the motor if the temperature goes beyond 40- 120 degrees Fahrenheit.
Moreover, you need to add some dielectric oil and clean out the waste from time to time to keep the cooling system steady.
Warranty
All the components used in this product offer high performance and excellent quality. And, with that, it provides five years of warranty, which shows the level of astounding confidence Wayne has on their products.
Other features
Besides all the user-friendly features we’ve mentioned, the CDU980 boasts additional conveniences. The installation is effortless, and if you’ve got some level of experience (not veteran-like), it should take only 15 minutes to get the pump ready and running. It’s a noise-free, durable, high-performing pump, a surefire investment.
Last update on 2023-03-09 / Affiliate links / Images from Amazon Product Advertising API
Does the Wayne CDU980E Clog Easily?
The sump pump offers a filtration section with a top suction design. It works as a barrier for debris and waste, so no particle can come inside the sump pump through the pipe.
Wrapping Up
This sump pump is indeed a value pack considering the build quality, design, performance, and power. Also, Wayne tried to keep prices reasonable even though they have included so many unique features. So, if you are looking for a sump pump that will not only be better in price but also best in features, then this one would be perfect for you.
We have tried to provide as much information as possible, and we believe the Wayne CDU980E review helps you understand the complex specifications of this pump.
